Windows Server – Manzana

Installing Siebel 8.2.2.4 on Windows 2008R2 Server Part 4

Hi,

Welcome to Installing Siebel 8.2.2.4 on Windows 2008R2 Server Part 4 of the series

“Doing a Complete install of Siebel 8.2.2.4 on Oracle 11 r2, Win 2008R2. All from Scratch“

In this part we will install and configure the Siebel Database server Software.

To Install a Siebel Development Server we will go through the following steps

Install the Prerequisite Software – this was completed in part 2 (here)
Install and Configure the Siebel Enterprise Server – this was completed in part 3 (here)
Install and Configure the Siebel Database Server (this step)
Install and Configure the Siebel Server
Install and Configure the Siebel Web Server
Patching and Postinstallation Tasks
Installing Siebel Charts
Enabling OpenUI

To Install the Siebel Database server we will go through the following steps:

Create tablespaces, datafiles, roles and users on the Database
Run Siebel Database Server Configuration

Installing Siebel 8.2.2.4 on Windows 2008R2 Server Part 3

Hi,

Welcome to Installing Siebel 8.2.2.4 on Windows 2008R2 Server Part 3 of the series

“Doing a Complete install of Siebel 8.2.2.4 on Oracle 11 r2, Win 2008R2. All from Scratch“

In this part we will install and configure the Siebel Gateway and the Siebel Enterprise server Software.

To Install a Siebel Development Server we will go through the following steps

Install the Prerequisite Software – this was completed in part 2 (here)
Install and Configure the Siebel Enterprise Server (this step)
Install and Configure the Siebel Database Server
Install and Configure the Siebel Server
Install and Configure the Siebel Web Server
Patching and Postinstallation Tasks
Installing Siebel Charts
Enabling OpenUI

Run this entire installation as the siebel service user, which must have full local administrator rights.

My installation media is the SIA 8.2.2.4 base. Start with the Siebel Enterprise Server Software (aka SES).

Installing Siebel 8.2.2.4 on Windows 2008R2 Server Part 2

Hi,

Welcome to Installing Siebel 8.2.2.4 on Windows 2008R2 Server Part 2 of the series

“Doing a Complete install of Siebel 8.2.2.4 on Oracle 11 r2, Win 2008R2. All from Scratch“

In this part we will configure prerequisite software to support the siebel installation. We will install more software as we go along, where appropriate. But there is a lot of prerequisite software to install.

Siebel 8 is still a 32 bit application, running on a x64 os+machine, that means 32 bit versions of all basic software needs to be installed. Oh Oracle/Siebel get that fixed! Give us a native x64 build – thanks! (note to self and others – write to supportweb and ask for this!).

To Install a Siebel Development Server we will go through the following steps

Install the Prerequsite Software (this step)
Install and Configure the Siebel Enterprise Server
Install and Configure the Siebel Database Server
Install and Configure the Siebel Server
Install and Configure the Siebel Web Server
Patching and Postinstallation Tasks
Installing Siebel Charts
Enabling OpenUI

Here’s the initial list of things you will install and configure in this part:

install jre x64
install jre x32
install oracle client x64 version
install oracle client x32 version
Install and configure Microsoft Office 2007 x32 version
Create the Siebel File Share

Notice that I Install the x32 versions last, to keep my path env. variable in order like this:

Installing Oracle BI Publisher 11g1 On Windows 2008R2 Server Part 1

Hi,

Welcome to Installing Oracle BI Publisher 11g1 On Windows 2008R2 Server Part 1 of the series

“Doing a Complete install of Siebel 8.2.2.4 on Oracle 11 r2, Win 2008R2. All from Scratch“

In this part we will install the Siebel Application server. This server will house a complete Siebel development server. Production servers should generally not be deployed on a single instance as we do here, but the installation of the development server demonstrates that it is possible, this walk-through will focus only on the development server installation.

Before we begin prepare the Siebel Development Server by doing the following steps:

install win 2008r2 operating system
join domain
update operating system with latest patches
install your favorite tools (mine are notepad++, procmon from sysinternals and winrar)

To Install a Siebel Development Server we will go through the following steps

Installing Oracle Business Intelligence Applications – Reports – BiP 11g – Part 1
Configuring Oracle Business Intelligence Applications – Reports – BiP 11g – Part 2
Configuring BiP 11g in Siebel

I’m still doing the writeup of many of the steps, as I bring them online I’ll update the links accordingly.

Read the Next part in the series “Configure the Oracle Database”

Enjoy!

/Henrik

Installing Oracle 11r2 on Windows 2008R2 Server Part 3

Hi,

Welcome to Installing Oracle 11r2 on Windows 2008R2 Server Part 3 of the series

“Doing a Complete install of Siebel 8.2.2.4 on Oracle 11 r2, Win 2008R2. All from Scratch“

In this part we will

Configure the Oracle Listener
Verify and Configure Windows Services
Configure the Windows Firewall
Do Connectivity Tests

The listener will provide access to the database instance we just created in Part 2. If you desire one listener can cater to more than on database instance on the same port, or you can chose to create multiple listeners on different ports, on for each database instance on the box. The latter provides better granularity control. That’s how I will do my install.

To Install an Oracle database we will go through the following steps

Install the Oracle Database Software This was completed in Part 1 Here
Configure the Oracle Database This was completed in Part 2 Here
Configure the Listener
Verify & Configure Windows Services
Configure Windows Firewall
Do Connectivity Tests

To Configure an oracle listener you need to run the netca from a command prompt. Follow the screenshots, and step guide below to configure the database for use as a Siebel development server.

Installing Oracle 11r2 on Windows 2008R2 Server Part 2

Hi,

Welcome to Installing Oracle 11r2 on Windows 2008R2 Server Part 2 of the series

“Doing a Complete install of Siebel 8.2.2.4 on Oracle 11 r2, Win 2008R2. All from Scratch“

In this part we will configure an oracle database server. This server will house a development database, and a test database. This walkthrough will focus only on the development database installation.

To Install an Oracle database we will go through the following steps

Install the Oracle Database Software This was completed in Part 1 Here
Configure the Oracle Database
Configure the Listener
Verify & Configure Windows Services
Configure Windows Firewall
Do Connectivity Tests

To Configure an oracle database you need to run the dbca from a command prompt. Follow the screenshots, and step guide below to configure the database for use as a Siebel development server.

We need to install a Custom Database, as we need to configure advanced properties. Hit Next

Installing Oracle 11r2 on Windows 2008R2 Server Part 1

Hi,

Welcome to Installing Oracle 11r2 on Windows 2008R2 Server Part 1 of the series

“Doing a Complete install of Siebel 8.2.2.4 on Oracle 11 r2, Win 2008R2. All from Scratch“

In this part we will install an oracle database server. This server will house a development database, and a test database. Production servers should generally not be deployed on the same database as development, but the installation of the test server demonstrates that it is possible, this walkthrough will focus only on the development database installation.

Before we begin prepare the Oracle Server by doing the following steps:

install win 2008r2 operating system
join domain
update operating system with latest patches
install your favorite tools (mine are notepad++, procmon from sysinternals and winrar)

To Install an Oracle database we will go through the following steps

Install the Oracle Database Software
Configure the Oracle Database
Configure the Listener
Verify & Configure Windows Services
Configure Windows Firewall
Do Connectivity Tests

I’m still doing the writeup of the actual installation, for now, if you do the installation – run an install software only with no starter database.

Read the Next part in the series “Configure the Oracle Database”

Enjoy!

/Henrik

Doing a Complete install of Siebel 8.2.2.4 on Oracle 11 r2, Win 2008R2. All from Scratch

Hi,

This is going to be a looong series of posts. I needed to install a new development environment, and I wanted to test the new Siebel 8.2.2.4 SIA with all the verticals available.

Installing Siebel is no small task, and this guide is not meant to be a full replacement for reading up on the procedure on supportweb (My Oracle Support) MOS, including installation guide in bookshelf, release notes, post installation information, bugs and what-have-you-not, I’ll do my best to link to the different documents that may be relevant along the way.

The Installation will Guide you through:

Installing Oracle 11r2 On Windows 2008R2 (x64)
Installing Siebel 8.2.2.4 On Windows 2008R2 (x64)
Installing Oracle BI Publisher 11g1 Windows 2008R2 (x64)

It will not:

Teach you to install windows 2008R2

I’ll assume the following, that you in advance prepare and install two Windows 2008R2 servers in a domain. I use Hyper-V services, its fast and effortless to get started on the deployment for a new development environment.

Lets Get Started, We will do the Oracle database first!

Read About the Installation of the Oracle Database here: Installing Oracle 11r2 on Windows 2008R2 Server Part 1

I´ll finish the writeup for all the bits and pieces over the next few weeks, and publish them as i get the time. Let me know if you have any comments!

Enjoy!

/Henrik